产品详情
查看大图

  • 产品名称：PTL转盘防水测试仪

  • 产品型号：P17.37
  • 产品厂商：德国PTL试验仪器
  • 产品文档：
你添加了1件商品 查看购物车
简单介绍：
PTL转盘防水测试仪是德国PTL产品中用于转动样本来确定防水的防水测试仪； PTL转盘防水测试仪符合IEC 60335-1 / 1991-04 &15.1.1,等标准。
详情介绍：
PTL转盘防水测试仪 进口转盘试验仪

产品名称：PTL转盘防水测试仪

产品品牌：德国PTL
产品用途：PTL转盘防水测试仪用于转动样本来确定防水
参照标准：
IEC 60335-1 / 1991-04 &15.1.1,
IEC 60529 / 1989-11 &14.1 Table VIII Fig. 4,
IEC 60598-1 / 1996-11 ?9.2.4 and & 9.2.5 Fig. 7, IEC 60947-1 / 1988 &C.8 Fig. C.4,
EN 60529 / 1991 & 14.1 Table VIII Fig. 4,
DIN 40 050 Part 9 / 1993-05 & 7.4 Table 8 Fig. 4, VDE 0470 Part 1 / 1992-11 &14.1 Table 8 Fig. 4
Standard Outfit:
1    tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above    floor approx. 220 mm,
1    frame with AC geared motor, with additional gear reduction to 1 + 0,1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.
 
Design: tabletop with apron of aluminum, frame of steel hot-dip galvanized and papyrus white structure varnished, for connection to 230 V 50 Hz (other voltages on request), including a 3 m long hard wearing connection cable with waterproof CEE-plug,
　table                carrying            Article
diameter:                capacity:             No.:
　730 mm               150 kg             P 17.37
　850 mm               150 kg             P 17.38
 1050 mm               150 kg             P 17.39
 
Additional Outfit:
 
PTL Swivel Accessory Unit
to change over from rotatory operation to swiveling operation with reverse of direction after approx. 350? absolutely necessary for specimens with connected cable,                                                        Article No.: P 17.44
Attachment :
 
PTL Telescope Support
for fitting on a turntable, to hold the specimens
Standard Outfit :
1 tubular stand, with mounting flange,
2 telescopic tubes, to clamp by tommy screws,
1 support grid, 270 mm x 180 mm, ±30 ° inclinable, to clamp by a tommy screw.
 
Design: all parts of stainless steel (material 1.4301 or 1.4305), screws of stainless steel, height of support grid above tabletop adjustable - unless otherwise agreed upon - from approx. 600 mm to 1200 mm, carrying capacity maximally 50 kg,   
                                                     Article No.: P 17.47
 
PTL Turntable with Telescope Support, to be adapted between eccentricity 100 mm and inclination of the support grid by 15 ° in 4 directions, for 2,5 min each, turned by 90 °each, including automatic control, according to e. g. EN 60529 / 1991 &14.2.2 Fig. 3:on request
标题：
内容：
联系人：
联系电话：
Email：
公司名称：
联系地址：
 
 
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!

粤公网安备 44030602001771号