- 德国FEMTO放大器
- OPHIR激光功率能量计
- 激光光束分析仪
- 德国GTE
- 数据采集AA LAB SYSTE...
- 流量测量AA LAB SYSTE...
- 光纤链路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博纳德试验指针销
- 插头插座类检测设备
- 灯头灯座类检测设备
- 标准地板防滑系列
- 进口手持型测力计
- 意大利Gabbrielli
- 英国MUNRO风速风向表
- 美国DL放大器
- 陶瓷扭转粘度计
- 高压电源放大器
- DEI脉冲发生器
- 瑞士Zurich Instrum...
- 冷冻负载试验包
- 博纳德试验机设备
- 体育检测仪器
- 美国ED&D试验指
- 德国PTL试验机设备
- 德国PTL试验指针销
- 光纤光谱仪
- 微型称重传感器
- 光学斩波器
- 高集数据采集卡
- 美国SRS放大器
- 德国WAZAU系列
- MONROE静电测试仪
- 其他
- TTI 光学斩波器
PS-15-25-L
▪输入电压100-240VAC
▪输出±15V ,+400/-250mA
▪Lemo ® 插头，屏蔽输出线
▪避免接地回路的非固定式设计
▪短路被保护
▪适用于所有FEMTO模块
Features
Linear Regulated Stabilization ± 15 VDC
Low Ripple and Noise
Wide Input Range Switched Power Supply
Safety Instructions
This power supply is exclusively designed for use with FEMTO amplifier modules. Before use,
take care to follow general electrical safety rules and notice the information shown in this
datasheet and at the type label on the power supply. Do not use visibly damaged power
supplies. Do not use this power supply in security relevant applications or in chemical
aggressive environment. Do not expose this power supply to unusual mechanical stress or
vibrations. During use do not expose the unit to direct sunlight and do not cover it because
cooling is made by convection. Respect the general rules for fire prevention. Use in original
condition only, do not open, do not repair the unit. When operation is no longer possible or
considered to be unsafe, the power supply must be taken out of service and be secured
against unintended operation.
Environmental Protection
FEMTO offers all end users in the EC the possibility to return “end of life” units without
incurring disposal charges. If you wish to return a unit for waste recovery, please contact
FEMTO for further information. Do not dispose of the unit in a litter bin or at a public waste
disposal site.
Specifications Test Conditions Ta = 25°C
Input Input Voltage 100...240 VAC, ± 10%, 47…63 Hz
Power Consumption, no load 2.3 W typ.
Power Consumption, max. load 20 W max
Inrush current max. 15 A @115VAC max. 30 A @230 VAC.
Output Output Voltage ± 15 VDC, ± 5%
+ 5 VDC (not connected to the output connector)
Output Current + 500 mA / - 300 mA max.
Ripple and Noise 20 mVpp typ. (@ ± 150 mA load)
Protections Insulation Voltage, prim./sec. 4242 VDC
Insulation Resistance, prim./sec. 10 GΩ min. (@ 500 VDC)
Temperature Protection installed
Overload Protection short-circuit-proof
No Load Protection idle-running-proof
